JetPack-4.6 Installation for MILBOARD-XV

In this blog post, we will install JetPack-4.6 for MILBOARD-XV. First, we will include our Image and DTB file in Jetson OS image. Then, we will install the Jetson OS into the MILBOARD-XV.

Attention: If you want to transfer the root file-system to an external drive, please format it before starting this blog post.

Open the NVIDIA SDK Manager. Select “JetPack 4.6” for Target Operating System and “Jetson AGX Xavier modules” for Target Hardware (The “Host Machine” components are not required). Then continue to Step 2.

Choose only “Jetson OS”, accept the terms & conditions and continue to Step 3.

The SDK Manager will ask the username’s password. Fill it and continue.

After the Jetson OS has created, the SDK Manager asks the Jetson module’s flashing style. Just skip it and exit from the SDK Manager.

Open the target HW image folder. (${HOME}/nvidia/nvidia_sdk/JetPack_4.6_Linux_JETSON_AGX_XAVIER_TARGETS/Linux_for_Tegra/)

For AGX Xavier:

    Download the BSP files from this GitHub link and extract it:

For AGX Xavier Industrial:

    Download the BSP files from this GitHub link and extract it:

Hint: The following steps are done for AGX Xavier, but they are the same with Industrial one (only the DTB file & flashing scripts are different).

Copy the “Image” file from the extracted folder to the “kernel” folder.

Then copy the DTB file into the “kernel/dtb” folder.

Return to the “Linux_for_Tegra” folder and open a Terminal.

For AGX Xavier, create the system image with this command:

For AGX Xavier Industrial, create the system image with this command:

A few seconds later …

Connect the recovery USB (between installer PC & MILBOARD-XV's recovery USB) and power connection of your MILBOARD-XV.

While the MILBOARD-XV's power connector plugged in,

• connect reset & recovery pins with ground (GND) pin together

• remove the reset pin

• remove the recovery pin on ground (GND) pin after 3 seconds later. This will set it to Recovery mode.

Then type “lsusb” and check the device connected in Recovery mode.

("0955:7019 NVidia Corp." for AGX Xavier & "0955:7919 NVidia Corp." for AGX Xavier Industrial)

For AGX Xavier, flash the Jetson OS with this script:

For AGX Xavier Industrial, flash the Jetson OS with this script:

A few seconds later …

At the end of the script, the device will reboot. Complete your Ubuntu installation wizard from the MILBOARD-XV (language, keyboard type, location, username & password etc.).

To avoid kernel update with "apt upgrade" or "apt-get upgrade" commands, please follow this guide on the Jetson module.

Delete LibreOffice & ThunderBird packages (if you don’t need) and remove the unnecessary packages to increase the free space. To do this, type these commands to the MILBOARD-XV side:

Connect the MILBOARD-XV to the Ethernet. Then, open the NVIDIA SDK Manager. Select “JetPack 4.6” for Target Operating System and “Jetson AGX Xavier modules” for Target Hardware (The “Host Machine” components are not required). Then, continue to Step 2.

Choose only “Jetson SDK Components”, accept the terms & conditions and continue to Step 3.

The SDK Manager will ask the username’s password. Fill it and continue.

Type the IP address, username and password of MILBOARD-XV and install the SDK Components.

At the end of the installation, the MILBOARD-XV becomes ready.