OS: JetPack 4.5
Software: All JetPack versions
Forecr’s DSBOX-N2 v1.1 is an industrial Box PC platform for deep learning based on edge analytics and industrial applications. It has versatile NVIDIA® Jetson Nano™ module that enables to run multiple neural networks in parallel for applications.
Quad-core ARM® Cortex®-A57 processor
NVIDIA Maxwell GPU with 128 CUDA® Cores
1xHDMI 2.0(max resolution 3840x2160)
1x Gigabit Ethernet
Isolated Digital IO (2 Inputs/3 Outputs)
1x M.2 Type-M Key for SSD
2x USB 3.1 Type-A1x miniPCIE, 1x M.2 Type-B Key, 1x microSD
WiFi/Bluetooth/LTE Connectivity by extension sockets
9-28 VDC Input
OS: Ubuntu Linux 18.04
Dimensions: 110 mm x 130 mm x 60 mm
The DSBOX-N2 implements 4-Pin Power Connector that accepts +9V to +28V DC power. First and third pins are positive polarization . Second and fourth pins are negative polarization. It is located on the rear side of the box.
DSBOX-N2 IO Connector & pinout
The DSBOX-N2 implements 14 pins GPIO Expansion connector which has 4 digital output pins, 4 digital input pins. It is located on the rear side of the box. The mating connector is “1790535” produced by Phoenix Contact.
DSBOX-N2 HDMI Connector
The NVIDIA® Jetson Nano™ module will output video via the DSBOX-N2 vertical HDMI connector that is HDMI 2.0 capable. It is located on the rear side of the box and the mating connector is HDMI Type-A Cable.
DSBOX-N2 USB 3.1 Type-A Connector
The DSBOX-N2 incorporates 2 USB 3.1 Type-A connectors with a 2A current limit per connector. It is located on the rear side of the box. The mating part is USB Type-A cable.
DSBOX-N2 10/100/1000 Ethernet Connector
The DSBOX-N2 implements RJ-45 ethernet connector for internet communication. RJ-45 connector is connected directly to the NVIDIA Jetson Nano module. It is located on the rear side of the box. The mating connector is RJ-45 Ethernet cable.
DSBOX-N2 Recovery Mode Micro USB Connector
The DSBOX-N2 implements a Micro USB connector to access the module by using serial connection. It is located on the front side. The mating connector is USB 2.0 Micro-B or Micro-AB Cable. This connector is also compatible with SIM card interface.
DSBOX-N2 SD Card Connector
The DSBOX-N2 implements a micro SD Card and nano SIM card connector together. The bottom part is used for micro SD card and the upper part is used for nano SIM card connector. It is located on the front side of the box.
DSBOX-N2 Power Button
The DSBOX-N2 implements a power button for energize the platform. It is located on the front side. A Power Supply capable of 50W or more is required to operate the DSBOX-N2 with all peripherals running at their respective maximum rating.
DSBOX-N2 Recovery Push Button
The DSBOX-N2 implements a recovery push button. Recovery button should be pressed with reset button at the same time. After released reset button, recovery button should be pressed a little bit more (min. 250 ms). It is located on the front side. It is recommended to use needle-like material.
DSBOX-N2 Reset Push Button
The DSBOX-N2 implements a reset button. It is recommended to use needle-like material and recommended to use needle-like material.
Thank you for reading our blog post.