USB 3.1 Speed Benchmarks for DSBOARD-NX2 with NVIDIA® Jetson™ TX2 NX processor

USB 3.1 Speed Benchmarks for DSBOARD-NX2 with NVIDIA® Jetson™ TX2 NX processor

Jetson TX2 NX

29 July 2021
ENVIRONMENT

Hardware: DSBOARD-NX2

OS: Jetpack 4.5.0

Benchmarking USB 3.1 SSD on DSBOARD-NX2 


In this blogpost, we are going to benchmark USB3.1 Speed for DSBOARD-NX2 industrial box PC with Jetson™ TX2 NX processor. We will use Samsung T7 Portable SSD PC500T. 


Firstly, we should connect USB 3.1 SSD device to our DSBOARD-NX2 with Jetson™ TX2 NX processor. Our USB3.1 device formatted as exfat so we need to install exfat packages to our DSBOARD-N2. Then, we should see available disks.

 

sudo apt-get install exfat-* -y







gnome-disks






We need to click disk setting button and we need to choose “Benchmark Partition” option.



Now, we should click “Start Benchmark” button. 



In this step, we should enter the number of samples and the sample size. We have entered 100 for both.



We should enter the password to our DSBOARD-NX2 with TX2 NX correctly. Then, we are ready to click the “Start Benchmark” button.



You can check the average read rate and average write rate. 

Thank you for reading our blog post. 



Türkçe