DSBOARD-XV2 Getting Started - Forecr.io

DSBOARD-XV2 Getting Started

Jetson AGX Xavier

05 April 2022

Hardware: DSBOARD-XV2

DSBOARD-XV2 is industrial carrier board for NVIDIA® Jetson™ AGX Xavier™. We will explain how to get started with DSBOARD-XV2 on this blog post.

Overview of DSBOARD-XV2

You can see the front and back view of DSBOARD-XV2.

Before you plug in DC power cable, you should plug in Ethernet cable, keyboard and mouse USB cables to USB ports, HDMI cable to HDMI port socket for monitoring the system and the Jetson™ AGX Xavier™ module to its socket.

Power Socket & Polarization

After connections are done, you can plug in the DC power cable to “DC IN” socket. The system runs as soon as you plug the DC power cable. The DC Power Source should be in the range of 18-32 Volt DC. You can find the DC Power socket when you open the package of the product.

You can see the power connector pin out below. First and third pins are positive polarization, second and fourth pins are negative polarization.

You can have DC Power Adapter, GPIO Mating Socket, HDMI Cable and Ethernet Cable as optional.

JetPack Installation & Interface Guide

After you energize the board, the system runs. The industrial PC has preinstalled operating system (Ubuntu 18.04). When the Ubuntu Desktop show up, you will need to user name and password. Both the user name and the password are “nvidia”.

If you would like to upgrade or downgrade the software version, please click here (for JetPack-4.x) or here (for JetPack-5.x).

If you would like to use CANBus interface , please click here.

If you would like to use, Industrial Input Output pins, please click here.

If you would like to use serial communication interfaces(RS232,RS422,RS485), please click here.

If you would like to view all connectors' definitions, please click here.

Thank you for reading our blog post.