1- How to Mount M.2 SSD into M.2 Key-M Slot on DSBOARD-NX2
SSD: Swissbit 960 GB Industrial SSD
In this blog post, we will explain how to mount Swissbit 960 GB Industrial SSD into the M.2 Key-M slot of DSBOARD-NX2.
M.2 Key-M slot is placed on the DSBOARD-NX2 as follows.
Before mounting the SSD into the M.2 Key-M slot, make sure pins and contacts match as follows.
Then, carefully plug the pins of SSD with the contacts of the connector at a 30-degree angle.
Push down the SSD to the bottom and mount the screw while holding the SSD down.
You can check if the SSD is mounted correctly by opening the disk utility with the following command.
Thank you for reading this blog post.